Get the most from your in-bin continuous Counter-Flow Dryer with Shivvers time saving Control Accessories.
This control box is used to keep the grain level between two limit switches in a grain drying bin.
View More
The use of Sequence Timers allows you to customize the on times for multiple transfer augers and run individual transfer augers only as long as necessary to empty them.
The Rotation Detector will monitor any rotating shaft or pulley and will activate a relay if the rotation speed is outside the pre-programmed limits.
The Diaphragm will detect and activate a switch when grain level is present.
The Command Center Expansion Box is an optional control box used with the CompuDry® Command Center.
This timer kit controls all Continuous Flow and Auxiliary Augers connected to the CompuDry® Command Center.
This long stem thermometer mounts with the probe into the plenum chamber which provides a visual confirmation of the temperature inside the plenum.
Used to measure back pressure in the plenum area of the bin.
The Motor Load Monitor Kit provides a normally closed contact which opens when the load on a motor drops below a certain level.
"I would not hesitate to buy Shivvers again based upon the customer service I received."
"It's automatic and you push the button and it does the job for you. The economy is good compared with some of the other dryers as far as fuel use is concerned, but the main advantage is the capacity and the fact we don't have to babysit it."
"I’ve slowly pushed my average moisture, as the price of corn goes down this year, it’s going to be more important than ever for those extra ten or fifteen bucks per acre."
Find A Dealer Request Information