Two tapered sweep augers bring grain through “metering ring” liners located under the bonnet. Fingers on these liners restrict grain flow so an even layer of grain is drawn off the floor without coring out in the center of the bin. The grain is then dropped into the basket where it is picked up by the horizontal unload auger and carried to an available Jumpster auger, air system, or elevator leg.
Two Ultra High Capacity Tapered Sweep Augers
These ultra high capacity sweeps remove approximately 500 bushels per hour each. This seriously increased removal rate allows for increased drying rate as produced by larger or multiple fans and heaters.
8" Horizontal Unload
The drying bin can be unloaded independently of the Circu-Lator through the built-in unloading system. The horizontal discharge unit may be converted to vertical discharge with the addition of an 'add-on' vertical unloader.
Heavy Duty Gearbox
Rugged gearboxes are built for long years of durable service. They are packed with moly grease, have oversize 1 1/4" stressproof shafts, hardened steel gears and tapered thrust bearings. They are protected by three seals on every shaft opening and zerks are provided for directly lubricating each bearing. The weight of the center vertical auger is borne by a rugged cast iron spider wheel which transmits the load to thrust bearings.