Controlled Flow Grain Spreader

This Controlled Flow Grain Spreader from Shivvers is designed to spread grain level when other grain spreaders can't get the job done! Its special geometric spreader pan gently drops the grain kernels in a unique, even spiraling pattern-just where they belong.

The spreader has a variable speed electric motor and a remote mounted control box that you adjust for bin height.

A slowly rotating grain diverter meters the right amount of grain to all sides of the bin, no matter how uneven the grain comes into the fill cone. This results in a truly level spread.

In a drying bin, an annoying low spot can develop while drying. A switch in the spreader control box allows you to stop the rotating grain diverter just ahead of the low spot. Your controlled flow grain spreader will fill in this area in a few minutes, and the drying bin is again level, without ever touching a scoop!

This spreader will handle a 10 to 13 inch diameter transport auger under really tough conditions. If you have a grain-spreading problem, the Controlled Flow Grain Spreader is your answer.

Main Control Box

The Main Control Box is mounted on the side of your bin next to your Circulator Control. This gives you ease of starting and stopping of the spreader from the ground.

Remote Box

This remote box is mounted on the bin roof at the manhole opening. Use it to turn the diverter off to fill any hole or use it to adjust the pan speed from the roof.

Inside view of Main Control Box