Blue Flame Crop Dryer
Performance Systems require high levels of evenly controlled heat and maximum volumes of air flow to achieve their full potential. The Shivvers dryers deliver capacity under the most difficult conditions, because they are built tough for the job.

Shivvers drying fans are in a class of their own. Only Shivvers offers dryers designed to specifically increase the speed, safety and economy of in-bin continuous flow drying. The selection of the proper burner and fan will determine, to a large measure, the capacity and satisfaction you will receive from your in-bin continuous flow Performance System. With superior construction, the Blue Flame Dryer includes a stainless steel 3,650,000 BTU burner, high capacity vaporizer and a 28-inch vane axial fan powered by a 13 HP soft start single-phase or three-phase electric motor.

Also available for Shivvers Performance Systems is a Shivvers 20 HP 3 Phase Centrifugal Fan and 3,200,000 BTU Centrifugal Heater (capacity calculated at 180° plenum). The Shivvers Centrifugal Fan allows Performance Systems to be used in noise limiting areas.

Meet the fuel economy demands of today with the Shivvers Blue Flame Dryer. Designed and built to increase the drying capacity of your Shivvers Performance System. The Blue Flame provides peak drying efficiency with minimal fuel consumption. You can choose a Blue Flame model to burn liquid propane, propane vapor or natural gas and because each dryer burns with an intense blue flame, you are assured of the right gas/air mixture for clean, complete fuel consumption.

The Blue Flame Dryer with Turbo Booster Fan dramatically steps-up drying capacity in any in-bin continuous flow system. Working together, they deliver air at up to 14 inches static pressure, higher than any centrifugal fan on the market. The 13 HP Turbo Booster Fan easily bolts to the Blue Flame Dryer and inter-locks into the Blue Flame safety controls. A separate start-stop switch and magnetic starter are standard on the turbo unit.

Standard on each Performance System is a Clean-Out Door. One is included for each burner and allows fines to be blown out of the plenum chamber so maximum air flow is maintained.